paid plans
An effective re-engagement campaign can make a world of difference to maintaining a healthy subscriber list. Considering there are some succinct steps that need to be set up, and there are several variations you can create, we’ve broken them down into these 5 key parts with descriptions.
A. Set up an Unengaged Trigger
This is where you’ll define subscriber behavior that’ll qualify as an “unengaged” subscriber based on days without opens, clicks, or both.
B. Craft a re-engagement message
This is where you’ll attempt to win back readers with a message that reminds them why they subscribed to your newsletter, it should contain promos or CTAs to re-engage them.
C. Set up a True/False Branch node
This is where you’ll split your list into those who should be removed versus those who re-engage based on how they interact with your re-engagement message.
D. Define the separate journeys for each path
This is where you can send a follow-up message to one or both of the paths and update the subscription status or custom fields of subscribers who remain engaged to eventually remove them while keeping re-engaged subscribers on your list.
E. Set up a segment to remove unengaged subscribers
This is where you’ll segment users who are unengaged based on your set subscription details, then delete the segment to keep your subscriber list clean.
How to create a re-engagement campaign
A: Set up an Unengaged Trigger
1. From the left panel in your account, go to Audience > Automations and then click on the New Automation button to get started.
2. Give the automation a name and an optional description, and then click Save Automation which will take you to the Workflow tab of your newly created automation.
3. Click on the Add Trigger button in your workflow which will open the sidebar.
4. Click Add Trigger and select the Unengaged trigger option.
5. Choose one of the required conditions and specify the time frame you are looking to define as “unengaged” subscribers.
- Days without opens: This counts subscribers who haven’t opened any email.
- Days without clicks: This counts subscribers who haven’t clicked anything.
- Days without opens or clicks: This counts subscribers who haven’t opened any email or clicked anything.
The Unengaged trigger only pulls in people who signed up prior to the number of days specified on the condition. For example, if you used “Days without opens” and set it to 30, it will only count people who signed up 30 days ago or earlier.
Option to add conditions
6. To get even more specific on which subscribers enter this automation, you can also specify additional conditions for the trigger by clicking on + Add Conditions.
7. Here, you’ll first need to specify whether you want subscribers to meet “All (AND)” or “At least one (OR)” conditions. If you select At least one (OR), you’ll need to define the attribute and set the value. You can continue to select + Condition to add as many conditions as you’d like.
8. When you are finished, review your selections and click on Save.
Unengaged trigger examples
- When you want to identify unengaged subscribers from a particular social media campaign, you could select “UTM Campaign” as the attribute and enter a keyword from the campaign.
- When you want to identify unengaged subscribers from a certain landing page, sign-up source, or lead magnet you could select “Embed Source” as the attribute and select a subscribe form or the “Subscribe for email updates” option.
B. Craft a re-engagement message
1. Select the Send Email node to add a new re-engagement message.
2. Click Edit Message and create a re-engagement message using the beehiiv email builder that you are used to.
Craft an engaging message that includes a compelling subject line, CTAs, promotions, or announcements to pique your audience’s interest, all of your changes will be saved in real-time. For content ideas, be sure to check out our re-engagement email tips here.
4. Click on Save to secure the Send Email node.
C. Set up a True/False branch node
1. Add a Time Delay step to specify the “wait” period, which is how long we give the subscriber to engage.
2. Configure the step to specify the number of days and click Save to secure the Time Delay node.
3. Select a True/False Branch node to add a new step that will define separate automation journeys based on the engagement with your last message.
4. Configure the step and click on + Add Conditions to configure the branch node logic.
5. Choose to segment subscribers by whether they open/click the email within the time delay set.
You can select:
- Days without Opens to match the number of days in the time delay.
- Days without click to match the number of days in the time delay.
- Days without Opens or clicks to match the number of days in the time delay.
Use the "is greater than" operator to ensure you're only including subscribers that did not engage since the configured time delay. This will effectively segment your users into those who don't engage with the re-engagement message within the set time period versus those who do. To learn more about using the True/False branch, refer to this article.
6. Click Back to finish saving the conditions, and then click on Save to secure the True/False branch node.
D. Define the separate journeys for each path
In this part, we’ll define two separate journeys based on whether subscribers qualify under the True path (they do not engage) within this campaign or the False path (they do engage).
Create the True path
1. For the True path, use the Update Subscription node to update their subscriber details.
2. Configure the Update Subscription node and set the subscription status to Inactive.
Option to add a message
3. On the True branch, you can also use the Send Email node to set up a follow-up message that gives those subscribers one more chance to re-engage with your newsletter. Make sure to place this node above the Update Subscription node and add a Time Delay node in-between.
Create the False path
4. Since the False path represents subscribers who are not inactive, you could either just let the journey end there or use the Send Email node to set up a follow-up message to confirm the users are re-engaged, as these subscribers will continue to remain on your list.
Alternatively, you could create a new custom field in your account and set that as the value to segment these subscribers. Learn more about segmenting with custom fields here.
Activate the automation steps
5. Now that you have the automation set up, it’s time to activate the steps by clicking the Configure Step and the Activate toggle for each node within the automation.
E. Set up a segment to remove unengaged subscribers
Now that you’ve created and activated an automation workflow that updates subscriber’s status to “Inactive” for those who don’t re-engage, you can create a segment to capture and delete them in bulk.
1. From the left hand panel in your account, go to Audience > Segmentation > and click on the Create Segment button to get started.
2. Give the segment a name (required) and a description (optional), then set the segment type to Dynamic.
3. Click on Define conditions. Up top you’ll see the And (ALL) comes preselected, below that click on + Condition > Attribute.
4. Choose the subscription Status attribute, set it to “is” and select the Inactive option.
5. Click on the Save Segment button to activate it.
The segment will pull in all subscribers whose status is inactive in real-time as they are updated via the re-engagement automation.
Option to delete unengaged subscribers
On the Overview tab, after the segment has had some time to run, you can review the list of emails and choose to quickly delete any subscribers pulled into this segment by clicking the access arrow next to Quick Export and selecting the Delete option which will permanently delete those subscribers in bulk from your audience list.
Frequently asked questions about re-engagement automations
-
There is currently a limit of 45 steps in our automated journeys. However, if you need this limit to be raised, you can reach out to our team from the Help page in the top navbar of your account. On the Help page, you’ll find a variety of resources including our chatbot Buzz and the option to submit a ticket to our support team.
-
Our unengaged trigger logic automatically filters out people who have signed up within the time window specified, so you will never run into the issue of accidentally removing subscribers who signed up more recently and qualify as “unengaged” within the window. In this example, if you set the condition to “7 days without opens”, it will only pull in subscribers who have signed up over 7 days ago with no opens.
-
Unfortunately, no, you cannot recover any subscribers that you delete from the segment. However, as a backup we suggest that you double check and/or export the list from the segment before you delete those subscribers.
-
Not at this time. Currently you can only specify opens across all emails within the specified time frame.
-
Not at this time. Currently you can only specify clicks across all emails within the specified time frame.
-
Yes, you can see which of your subscribers are unengaged by segmenting for those based on the subscription details. For example, if you update the status to “Inactive” for unengaged subscribers, you can then create a segment for “unengaged” subscribers to produce a list of subscribers who qualify for this.
-
Yes, here are some other resources on automated journeys: